Surface Finish
We offer four types of cutting finishes. Rough finish, Medium finish, Smooth finish and Very smooth finish. Faster the cutting rougher the finish and slower the cutting smoother the finish and so the cost differs for each finish.
The degree of surface finish and taper are again elaborated here below, to help our customers to decide which one will suit them.
Rough Finish
 | Smooth zone at top 1/4th of the thickness of the profile. Moderately deep serration zone at halfway down the thickness. Cut edge taper 0.1 to 0.5 mm or 1 to 3 degree per cut edge. Most suitable for further machining or fabrication or weldable parts. Least costing and cost effective finish. |
Medium finish
 | Smooth zone at top 1/2 of the thickness of the profile.Mild serration zone at halfway down the thickness.Cut edge taper 0.1 to 0.5 mm or 1 to 2 degree per cut edge.Most preferred cutting finish by many customers.Moderate Cost and acceptable cutting finish. |
Smooth finish
 | Smooth zone at top 3/4th of the thickness of the profile.Very Mild serration zone only at 1/4th down the thickness.Minimul cut edge taper 0.1 to 0.3mm or 1 to 2 degree per cut edge.Most preferred cutting finish for Architectural works.Costs more but visibly good cutting finish. |
Very Smooth finish
 | Very Smooth zone at top 3/4th of the thickness of the profile.Smooth zone at 1/4th down the thickness.Very Minimul cut edge taper 0.1 to 0.3mm or 1 to 2 degree per cut edge.Not a preferred cutting finish. Suitable for gear cutting.Costs the most but very good cutting finish. |
Thickness Capability
With our highly powerfull cutting system, We can cut SS,INCONEL like hardest of metals upto 150mm and can cut nylons upto 250mm
What materials type we can cut?
Exotic Metals – Titanium, Tantalum, Molybdenum, Niobium, Rhenium, Inconel, Inver, Nilo 36, Cobalt-Nickel alloys.
Ferrous – Stainless Steel, Carbon Steels, Steel alloys, Hastalloy, Monel, Nickel-Chromium Tool Steels, Heat Treated Hardened Steel.
Non-Ferrous – Aluminium, Brass, Bronze, Copper ,Silver Copper.
Plastics-Acrylic, Delrin Nylon, HDPE, PVC, Teflon, corian, Plexiglass, Polyethylen,e Polycarbonate, Thermoplastics, Fibre-glass, Carbon Fiber, Graphite.
Composites – Hardox plates,Wear plates,ABS, Kevlar,Hylam sheets. Rubber-Buna-N, EPDM, Neoprene, Boron, Urethane ,SantoPrene, Silicone, Vinyl, Nitrile, Viton, Butyl.
Misc-Wood, Glass, Foam, Mylar Laminates, Printed Circuit Board, Ceramic Tiles, Vitrified Tiles, Granite inlays, Marble inlays.